Removing Memory Cards

Note: If your printer is connected to your computer, see page 18 for instructions on removing your memory card.

Make sure the card light is not flashing, then pull the card straight out of the slot.

Card light

Caution: Do not remove a card while the card light is flashing; you may lose photos on your card.

Connecting External Devices

If you have one of the following devices, you can connect it directly to your printer using a USB cable:

■Digital camera with PictBridge™ or USB DP (USB Direct Print) support

■USB thumb drives (see http://support.epson.com for a list of compatible drives)

■USB CD/DVD burners and drives (see http://support.epson.com for a list of compatible drives)

■100 or 250MB Iomega Zip drive, AC or USB powered

■Memory cards with a commercially available USB adapter (such as the MicroTech™ ZiO!™)

■MO (Magneto-Optical) drives

Note: Epson cannot guarantee the compatibility of any cameras or drives. If you’re not sure about your camera or drive, you can try connecting it. If it’s not compatible, you’ll see a screen saying that the connected device cannot be used.

If you are using a Zip disk or a thumb drive, it must be formatted as a FAT16 disk. If you insert a Macintosh-formatted Zip disk or thumb drive, you see an error message saying that the inserted card cannot be used with the printer.

Tip: When you connect a CD drive, you can also print photos from Picture CDs that you get from your photo lab.

14 Accessing Photos