3.Press the Print Settings button to open the menu. Make the Layout setting and press the OK button.

You can select the following layout options when printing on a CD/DVD.

1-up

 

One photo will be printed on the

 

 

CD/DVD, centered on the hole in the

 

 

middle of the disc.

 

 

 

4-up

 

Four photos will be printed on the

 

 

CD/DVD, with one photo in each of

 

 

the four quarters.

 

 

 

8-up

 

8 photos will be printed on the

 

 

CD/DVD, arranged in a circle around

 

 

the outer edge of the disc.

 

 

 

12-up

 

12 photos will be printed on the

 

 

CD/DVD, arranged in a circle around

 

 

the outer edge of the disc.

 

 

 

4.Press the l or r button to select the photos you want to print.

5.Press the u button to specify the number of copies for each photo if you selected the 4-up, 8-up, or 12-up option for the Layout setting.

Note:

❏To select more than one photo, repeat steps 4 and 5 to select other photos and the number of times to print them.

❏The total number of images that will be printed is displayed at the bottom of the LCD display.

❏When selecting photos for the 4-up, 8-up, or 12-up layout setting, you can select a number of photos less than the total. Unused areas of the layout will be left blank. If you specify a number of photos greater than will fit on one CD/DVD, the extra images will be added to a layout for an extra CD/DVD and the printer will ask you to load another CD/DVD after printing the CD/DVD.

❏You can confirm the print settings by pressing the OK button.

6.Adjust the printing area (inside and outside diameter) if needed. For details, see the following section.

7.Press the x Start button to print.

Note:

❏We recommend that you print a test of the layout on a test CD/DVD, before printing on a real CD/DVD.

❏Allow CDs and DVDs to dry for 24 hours.

❏If necessary, you can adjust the print position. See “If the printing is misaligned” on page 15 for details.

❏If an error message appears on the LCD panel, follow the instructions on the LCD panel to clear the error.

Adjusting the printing area

Follow the steps below to adjust the diameter of the printing area on a CD or DVD.

1.Press the q Setup button to open the Setup menu.

2.To adjust the inside diameter of the printing area, select CD/DVD Position Inside. To adjust the outside diameter of the printing area, select

CD/DVD Position Outside, then press the r button.

3.Set the appropriate value. You can adjust the inside diameter between 18 to 46 mm, and the outside diameter between 114 to 120 mm, at intervals of 1 mm.

4.Press the OK button to set the changes you made and return to the Setup menu.

If the printing is misaligned

Follow the steps below to adjust the print position, if necessary.

1.Press the q Setup button to open the Setup menu.

2.To move the image up or down, select CD/DVD Position Up/Down. To move the image to the left or right, select CD/DVD Position Left/Right, then press the r button.

3.Select the amount to move the image. Set a minus quantity (d button) when moving the image down or left, or a plus quantity (u button) when moving it up or right. Then press the OK button.

You can select from -2.0mm to 2.0mm.

4.Press the OK button to set the changes you made and return to the Setup menu.

Note:

The printer remembers the print adjustment setting even after it has been turned off, so you do not need to adjust the position each time you use the CD/DVD function.

English

Other Creative Printing Options

15