Printing From a Camera or Phone

You can print your photos directly from a digital camera, mobile phone, or other portable device.

■If your camera or mobile phone is PictBridge- or USB DIRECT-PRINT™- compatible, you can connect it directly to your printer and print your photos.

■If your mobile phone, PDA, or other device supports infrared transmission, you can send your photos to the printer and print them wirelessly.

■Using the optional Epson Bluetooth Photo Print Adapter, you can also print wirelessly from a Bluetooth-enabled PDA, mobile phone, or computer. For more information, see the on-screen User’s Guide.

Printing From a PictBridge Camera or Phone

Make sure your camera or phone supports either PictBridge or USB DIRECT- PRINT, and your photos are sized between 80 × 80 pixels and 9200 × 9200 pixels.

1.Make sure the printer is turned on and has no memory cards in its slots.

2.Load the type of paper you want to use (see page 7). Load enough sheets for the number of photos you want to print.

3.Press Setup, press l or r to select PictBridge Settings, then press OK.

4.Press l or r to select your print settings, as described on page 21.

5.After you select the settings you want, press OK.

Note:

These settings remain in effect until you change them, so you only need to set them the first time you print from your camera or phone. To reset all settings to their defaults, see page 27.

28Printing From a Camera or Phone