Borderless Expansion
When you print borderless photos, your image is slightly expanded and cropped to fill the sheet of paper. If too much of your photo edges are cut off, you can adjust the expansion setting as described below.
1.Press the x Print Settings button.
2.Press u to choose Expansion, then press r.
3.If too much of your photo edges are cut off, select Mid, or Min (least expansion). If you see a white edge on your photo, select Standard.
4.Press OK to save your setting.
Note:
This setting remains in effect until you change it. To reset all settings to their defaults, see page 40.
Fit Frame
If your photo is too long or wide to fit inside the available space on your selected layout, part of the image is automatically cropped. If you want your entire image to print with white space filling in the rest of the print area, you can turn off Fit
Frame.
Cropped area 
Fit Frame turned on | Fit Frame turned off |
To turn automatic cropping off or on:
1.Press the x Print Settings button.
2.Press d or u to select Fit Frame, then press r.
3.Select Off or On, then press OK.
Note:
This setting remains in effect until you change it. To reset all settings to their defaults, see page 40.
Cropping Your Photos 37