Message | Solution | |
|
| |
Cannot recognize the device. | Make sure you’ve inserted your memory | |
| card correctly. If you connected a USB | |
| storage device, make sure you’ve inserted | |
| the disk correctly. | |
|
| |
Cannot recognize the memory card | Make sure you’ve inserted the memory card | |
or disk. | or storage disk correctly. Check to see if | |
| there is a problem with the card or disk. | |
|
| |
A problem occurred while | Retry the procedure. If the error reoccurs, | |
formatting. Formatting cancelled. | there may be a problem with your memory | |
| card or storage disk. Check the card or disk, | |
An error occurred while saving. Save | ||
then try again. | ||
cancelled. | ||
| ||
|
| |
Cannot create a folder on the | Insert a new memory card or storage disk | |
memory card or disk. Operation | and try again. | |
cancelled. |
| |
|
| |
Print head cleaning failed. | Try cleaning the print head again. If the error | |
| message reoccurs, contact Epson as | |
| described on page 82. | |
|
| |
Backup Error | A problem occurred and the backup was | |
Error code | cancelled. Make a note of the error code and | |
XXXXXXXX | contact Epson as described on page 82. | |
|
|
Problems and Solutions
Check the solutions below if you’re having trouble using your RX580.
Noise Problems
■The first time you install ink cartridges, the printer must charge its print head for about 2 minutes. Wait until charging finishes (when you see the message “Initialization is complete”) before you turn off the RX580, or it may charge improperly and use excess ink the next time you turn it on.
■Turn off the RX580, then make sure the ink cartridges are inserted completely and the ink cartridge cover is closed completely. Also make sure no packing material remains inside. Wait a moment, then turn the RX580 back on.
Problems and Solutions 79