Epson RX600 Viewing Photos from a Memory Card, Lightening or Darkening Copies, Restoring Color as You Copy, Saving and Reusing Copy Settings, Canceling Copies

Epson Stylus Photo RX600

Copy Layout setting	Result

Mirror

Copies a mirror image of your photo onto transfer paper so that you can iron it onto a shirt or other cloth article

Wallet Photo

Prints nine wallet-size copies of the photo on the page

*BorderFree is available only on selected Epson photo papers.

**If you notice reduced print quality at the bottom of your copy, try using the Standard setting.

3.After you choose your copy layout, press OK.

1.Press the Menu button to display the Copy Menu.

2.Press the d button to choose Copy Density.

3.Press the l button to lighten or the r button to darken your copies.

4.Press the OK button to go back to the additional copy settings.

You can bring an old 4 × 6-inch photo back to life as you copy it onto Premium Glossy Photo paper.

1.Press the Menu button to display the Copy Menu on the RX600 screen.

2.Choose Copy Layout with the u and d buttons and use the l and r buttons to select Multi-Photo.

3.Press the OK button. You see a layout screen.

4.Press the OK button again. You see the Multi-Photo menu.

5.Press the d button to choose Restoration.

6.Press the l button to choose On. Your photo paper type and size are selected automatically.

7.Press the x Color button and follow the instructions on the RX600 screen to copy and restore your photo.

Note:

To restore the color in an old film strip photo or slide and copy or scan them, see the User’s Guide.

Follow these steps to save a set of custom copy settings so you can quickly reuse it for a similar copying job.

1.After selecting settings, press and hold the Recall button until you see The current setting has been saved on the LCD screen. Then press OK.

If you want to save a different group of settings, repeat step 1. This replaces your previously saved settings.

2.To use your saved settings, press the Recall button until you see Recalled on the LCD screen. Then press OK.

To cancel a job in progress, press the y Stop button. Canceling appears on the LCD screen and your page is ejected.

If you want to reset copy and print settings to their original default settings, follow these steps:

1.Press the Setup button.

2.Use the u and d buttons to choose Restore to Factory Settings.

3.Press OK, then press OK again to restore your settings.

4.You see a confirmation message that settings have been restored. Press OK.

After you’ve inserted your memory card, you can view your photos on the RX600 screen.

Note:

You can also print an index sheet containing small thumbnail images of the pictures on your memory card. See page 9 for instructions.