Epson Stylus Photo RX600

Selecting the Correct Media Type

Select the paper Type (Windows) or Media Type (Macintosh) setting according to these guidelines:

 

Select this Type or

For this paper

Media Type setting

Plain paper sheets or envelopes

Plain paper

Epson Iron-on Transfer paper

 

 

 

Epson Premium Bright White Paper

Bright White Paper

 

 

Epson Photo Quality Ink Jet Paper

Photo Quality Ink Jet Paper

Epson Photo Quality Ink Jet Cards

 

Epson Photo Quality Self Adhesive

 

Sheets

 

 

 

Epson Matte Paper Heavyweight

Matte Paper - Heavyweight

Epson Double-Sided Matte Paper

 

PremierArt Matte Scrapbook Photo

 

Paper for Epson

 

 

 

Epson Photo Paper

Photo Paper

 

 

Epson Glossy Photo Paper

Glossy Photo Paper

Epson All-Purpose Glossy Photo Paper

 

Epson Glossy Photo Greeting Cards

 

 

 

Epson Premium Glossy Photo Paper

Premium Glossy Photo

Epson Photo Stickers

Paper

 

 

Epson Premium Luster Photo Paper

Premium Luster Photo

 

Paper

 

 

Epson Premium Semigloss Photo Paper

Premium Semigloss Photo

 

Paper

 

 

Epson ColorLife Photo Paper

ColorLife Photo Paper

Epson Semigloss Scrapbook Photo

 

Paper

 

 

 

Epson Ink Jet Transparencies

Ink Jet Transparencies

 

 

Placing the Original Document

Follow these steps to position a photo or document to scan or copy:

1.Open the scanner lid.

2.Place your photo or document face-down on the glass in the upper left corner about 1/10 inch from the edges, as shown.

0.1 in

0.1 in

Move the photo or document in about 1/10 inch from the edges

3. Close the scanner lid.

Note:

If you place your photo or document against the edge of the glass, the edges of your photo or document may not be copied.

To scan or copy a thick document, you can remove the scanner lid. Turn off the RX600, and open the scanner lid completely. Then disconnect the cord from the TPU connector and pull the lid straight up. Turn on the RX600 and gently press down the original to keep it flat on the scanner glass as you scan. When you’re finished, be sure to turn off the RX600 before replacing the scanner lid and plugging in the connector.

Copying Without a Computer

Follow the steps below to copy a photo or document using just the RX600. (To copy using Epson Smart Panel, see the User’s Guide.)

1.Make sure the RX600 is on, paper is loaded, and the output tray is open.

2.Place your document face-down on the glass, as described on page 6.

3.Close the scanner lid.

4.Press the Copy button to set the RX600 to Copy mode.

5.Make sure you see Standard Copy at the top of the LCD screen. This prints a photo or document with borders. If you want to select a different setting, such as a photo with no borders, press the Menu button, then see “Changing the Copy Layout” below.

6.Use the u and d buttons to choose the copy options listed below. Use the l and r buttons to change settings.

❏Copies: Choose the number of copies you want to make (1 to 99).

❏Reduce/Enlarge: Choose from these options:

Setting

Result

 

 

Actual

Prints the image at its original size. Do

 

 

 

not select this when you want

 

 

 

BorderFree copying.

 

 

Auto Fit Page

Reduces or enlarges the image, as

 

 

 

needed, to fit the selected paper size.

 

 

 

Always select this for BorderFree

 

 

 

copying.

 

 

Letter Æ 4 × 6

Converts the original document size (to

4

× 6

Æ Letter

the left of the arrow) to the finished

Letter Æ 5 × 7

copy size (to the right of the arrow). Do

5

× 7

Æ Letter

not select this when you want

4

× 6

Æ 8 × 10

BorderFree copying.

8

× 10 Æ 5 × 7

 

 

 

 

 

6 - Epson Stylus Photo RX600

2/04