Epson RX600 Loading Paper, Interface, Safety Approvals, Supported Memory Cards, Memory Card Image File Requirements, Single Sheets

Epson Stylus Photo RX600

Interface

Standard	Based on Universal Serial Bus
	Specifications Revision 2.0, Universal
	Serial Bus Device Class Definition for
	Printing Devices version 1.1; Universal
	Serial Bus Mass Storage class Bulk-only
	Transport Revision 1.0
Bit rate	480 Mbps (high speed device)
Data encoding	NRZI
Connector	USB Series B
Recommended
cable length	6.6 feet (2 meters) or less

Safety Approvals

Safety standards	UL 60950, CSA C22.2 No. 60950
EMC	FCC part 15 subpart B class B
	CSA C108.8 class B

Supported Memory Cards

Top slot	SmartMedia (maximum 128MB;
	standard 2000 compliant)
	xD-Picture Card

xD	SmartMedia
Middle slot (left)	Memory Stick
	Memory Stick PRO
	MagicGate Memory Stick
	SD (Secure Digital) Card
	MMC (MultiMediaCard)
	Memory Stick Duo (adapter required)
	miniSD Card (adapter required)

SD or MMC	MemoryStick
Bottom slot	CompactFlash Type I and Type II
	IBM Microdrive

CompactFlash or Microdrive

Memory Card Image File Requirements

File format	JPEG or TIF format image files,
	DOS FAT taken with a DCF
	version 1.0 compliant digital camera
	(supports Exif Print v. 2.1 and 2.2)
Media format	DCF (Design rule for Camera File
	system) version 1.0 compliant*
Image size	Vertical: 120 to 4600 pixels
	Horizontal: 120 to 4600 pixels
Number of files	Up to 999

*The DCF standard is set by the Japan Electronics and Information Technology Industries Association (JEITA).

Note:

You can’t print images whose file names contain double-byte characters, as is the case with some Asian language fonts. Do not use Asian language fonts to name your files if you will be printing from the memory card.

Loading Paper

Single Sheets

1. Open the output tray.

Output tray

2. Flip the feeder guard forward.

Feeder guard

3.Press the sides of the left edge guide together and slide it all the way to the left.

4 - Epson Stylus Photo RX600 2/04