Epson SED1278F/D manual Timing Chart, Display Command, Read Cycle, Write Cycle

SED1278F/D
Timing Chart
Read Cycle	VIH1			VIH1
RS
	VIL1			VIL1
	tAS			tAH
R/W	VIH1				VIH1
		tWEH		tAH
		VIH1	VIH1	tfE
	VIL1			VIL1	VIL1
E
	tfE			tDHR
		tRD
DB0 to DB7		VOH1	Significant		VOH1
		VOL1	Data		VOL1
			tcycE
Write Cycle	VIH1			VIH1
RS
	VIL1			VIL1
	tAS			tAH
R/W	VIL1				VIL1
		tWEH		tAH
		VIH1	VIH1	tfE
	VIL1			VIL1	VIL1
E
	tfE			tDH
			tDS
DB0 to DB7		VIH1	Significant		VIH1
		VIL1	Data		VIL1
			tcycE

DISPLAY COMMAND

Parameter	RS	R/W	DB7	DB6	DB5		DB4		DB3		DB2	DB1	DB0	Note
CLEAR DISPLAY	0	0	0	0	0		0		0		0	0	1
CURSOR HOME	0	0	0	0	0		0		0		0	1	1
ENTRY MODE SET	0	0	0	0	0		0		0		1	I/D	I/D	DB1=1: Increment, DB1=0: Decrement
														DB0=1: The display is shifted.
														DB0=0: The display is not shifted.
DISPLAY ON/OFF	0	0	0	0	0		0		1		D	C	C	DB2=1: Display on	DB2=0: Display off
														DB1=1: Cursor on	DB1=0: Cursor off
														DB0=1: Brinking on	DB0=0: Brinking off
CURSOR/DISPLAY SHIFT	0	0	0	0	0		1		S/C		R/L			DB3=1: Shifts display one character
														DB2=1: Right shift, DB2=0: Left shift
SYSTEM SET	0	0	0	0	1		DL		N		F			DB4=1: 8 bits, DB4=0: 4 bits
														DB3=1: 2 lines display (1/16 duty),
														DB3=0: 1 line display		)
														DB2=1: 5 10 dots, 1/11 duty
														( DB2=0: 5 7 dots, 1/8 duty
SET CGRAM ADDRESS	0	0	0	1						ACG				The address length that can be set is 64 addresses.
SET DDRAM ADDRESS	0	0	1						ADD					The address length that can be set is 80 addresses.
READ BUSY FLUG/	0	1	BF					AC						DB7=1: Busy (instruction not accepted)
ADDRESS COUNTER														DB7=0: Ready (instruction accepted)
WRITE DATA	1	0				Write Data
READ DATA	1	1				Read Data

Don‘t care

4