EPSON Stylus Color 777/777i
8/00 EPSON Stylus Color 777/777i - 9
7. If the nozzle check p attern has no gap s in its dots, click
Finish.
If the pattern is missing dots, click Clean to clean the print
head again. If you don’t see any improvement after cleaning
three or four times, ch eck the solutions in the Printer Basics
book. You can also turn the printer off and wait
overnight—this allows any dried ink to soften—and then
try cleaning the print head again.

Examining the Nozzle Ch eck Pattern

Examine the nozzle check pattern you print (the lower row
will be in color). Each staggered horizontal and straight
vertical line should be complete, with no gaps in the dot
pattern. If your printout looks okay, you’re done.
If any dots are missing (as shown here), clean the print head
again, as described on page 8.
Aligning the Print Head
If your printouts contain misaligned vertical lines, you may
need to align the print head. Your printer must be connected
to a local port, not on a network, to use the Print Head
Alignment utility.
1. Make sure the printer is turned on, but not printing, and
letter-size paper is loaded.
Load paper that’s at least 8.27 inches (210 mm)
wide to prevent ink from spraying inside the printer
and smudging your printouts. For the best results,
load EPSON ink jet pape r in the printer wh enever
you check the print head alignment.
2. If you have a n applicatio n running, acc ess the print er
settings dialog box.
Or, with Windows, click Start, point to Settings, and
select Printers. Right-click the EPSON Stylus Color 777/
777i icon, then select Properties (Windows 95 or 98),
Document Defaults (Windows NT), or Printing
Preferences (Windows 2000).
3. Windows: Click the Utility tab.
Macintosh: Click the Utility button.
4. You see the Utility menu. Click the Print Head
Alignment button.
5. Follow the instruct ions on the screen to print a test page.
You see this window:
6. On the printed pag e, select the pattern that shows the two
vertical lines most pre cisely printed on top o f each other.
Select one pattern each f or rows 1, 2, and 3. Then enter the
number of the best pattern for each row in the
corresponding boxes on the screen.
7. Click Realignment to print another tes t page. Make sure
the pattern numbered 8 in each row is the be st aligned. If
not, repeat steps 6 a nd 7.
8. When you’re finished, click Finish.
Cleaning the Printer
To keep your printer working at its best, you should clean it
several times a year. Follow these steps:
1. Turn off the printer, unplug the power cord, and
disconnect the prin ter cable.
2. Remove all the pap er from the sheet fee der.
3. Clean the exterior of the printer with a soft, damp cloth.
4. Clean ink out of the printer’s interior wit h a soft, damp
cloth.
Don’t touch the gears inside the printer.
Never use a hard or abrasive brus h, or alcohol or thinner
for cleaning; they can damage the printer components
and case.
Don’t get water on the printer components and don’t
spray lubricants or oils inside the printer.
Don’t use any cleaning sheets included with special
media; they may jam inside the printer.
missing dots
missing dots missing dots