If the auto cutter does not return to its normal position by itself, follow the steps below to correct the problem:

1.Pull the cutter cover toward you so that you can rotate the cutter motor knob.

POWER

ERROR

OUTPAPER

FEED

2. Following the instructions on the label, rotate the knob until the appears in the hole.

ADJUSTMENT:

TURN KNOB UNTIL YOU SEE TRIANGLE IN OPENING

POWER ERROR OUTPAPER FEED

3. Close the cutter cover.

3-6Troubleshooting

Page 35
Image 35
Epson T88II manual 6Troubleshooting