Line spacing default 4.23 mm 1/6 | Epson T88II specs

Notes:

Printing speed may be slower, depending on the data transmission speed and the combination of control commands.

There may be variations in printing after switching the mode of the printing speed. To prevent this for logo printing, using a downloaded bit image is recommended. (Change in printing speed does not occur during downloaded bit image printing).

Paper feeding speed: Approximately 120 mm/second (approximately 4.72”/second) continuous paper feeding

Line spacing (default): 4.23 mm (1/6”)

Programmable by control command.

Number of characters: Alphanumeric characters: 95 International characters: 32

Extended graphics: 128 × 7 pages (including one space page)

kanji chareacters: JIS-Level 1, Level 2 (JIS X0208-1990)

Character structure: Font A: 12 × 24 (including 2-dot spacing in horizontal)

Font B: 9 × 17 (including 2-dot spacing in horizontal)

Kanji: 24 × 24

Font A is the default

4-2Reference Information

Image 38

Epson T88II manual Line spacing default 4.23 mm 1/6, 2Reference Information

Contents

TM-T88II Series Vorsicht Printer Parts and Labels Labels Solving Problems Setting Up the PrinterInstalling and Replacing Paper Quick ReferencePage Iii FCC Compliance StatementFor American Users Declaration of Conformity EMI and Safety Standards Applied Reference Setting Up and UsingAbout This Manual Printing FeaturesIntroduction Application Software Options and Accessories Ordering Paper and Supplies Specified Thermal Roll Paper NTP080-80 Kanzaki Specialty Papers, Inc Other Qualified Suppliers for Thermal PaperJujo Thermal Oy Finland Using the Printer Xii Unpacking Setting Up the PrinterSetting Up the Printer 2Setting Up the Printer Connecting the Cables and Grounding the PrinterConnecting the computer Connecting the Drawer 4Setting Up the Printer Anschließen der Lade Connecting the Power Supply Grounding the PrinterPage Installing or Replacing the Paper Roll 8Setting Up the Printer Tear off the paper as shown Self Test Using the Power Switch Cover10Setting Up the Printer Running the self test Self test printing Please press the Paper Feed button Adjustments and Settings 12Setting Up the Printer Operating the Control Panels Using the PrinterUsing the Printer Control Panel 2Using the Printer Panel lights General problems TroubleshootingTroubleshooting Printing problems Printing is poor Error light is off, but nothing is printed2Troubleshooting Paper is jammed inside the printer Cleaning the print headPaper handling problems 4Troubleshooting Auto cutter problems Auto cutter is jammed 6Troubleshooting Hexadecimal Dump Reference Information Printing SpecificationsReference Information Line spacing default 4.23 mm 1/6 2Reference Information Paper Specifications Paper roll single-ply Size Consumption at Electrical CharacteristicsCurrent Humidity TemperatureEnvironmental Conditions DIP switch functions Dip Switch and Paper Near End SettingsSetting the DIP Switches Serial interface specification 2Dip Switch and Paper Near End Settings Dip Switch and Paper Near End Settings A-3 Print Density Selection Parallel interface specification 4Dip Switch and Paper Near End Settings Dip Switch and Paper Near End Settings A-5 Changing the DIP switch settings 6Dip Switch and Paper Near End Settings Adjusting the Paper Near End Detector Dip Switch and Paper Near End Settings A-7 Epson Sales Subsidiaries Epson Sales Subsidiaries B-1 2EPSON Sales Subsidiaries