Epson TK14 Description of the Control Commands, Dle Eot, Esc Sp, Esc @, Esc E, Esc G, Gs B, Esc J

FENIX IMVICO TK14 OPERATION MANUAL

4.3- DESCRIPTION OF THE CONTROL COMMANDS

Command List

		Command
Command	Name	classification		Page
		Executing	Setting
LF	Print and line feed	X		31
CR	Print and carriage return	X		31
DLE EOT	Real-time status transmission	X		31
ESC t	Select character code table		X	33
ESC SP	Set right-side character spacing		X	33
ESC !	Select print mode(s)		X	33
ESC 2	Select default line spacing		X	34
ESC 3	Set line spacing		X	34
ESC @	Initialize printer	X	X	34
ESC E	Turn emphasized mode on/off		X	34
ESC G	Turn double-strike mode on/off		X	34
GS B	Turn white/black reverse printing mode on/off		X	35
ESC J	Print and feed paper	X		35
ESC M	Select character font		X	35
ESC a n	Select justification	x		36
ESC c 3	Select paper sensor to output PE signal		X	36
ESC c 5	Enable/disable panel buttons		X	37
ESC d	Print and feed n lines	X		37
GS !	Select character size		X	37
GS ( A	Execute test print	X		38
GS L	Set left margin		X	38
GS T	Set print position to the beginning of print line	X		39
GS V	Feed paper to cut paper line		X	39
GS f	Select font for HRI characters		X	39
GS H	Select printing position of HRI characters		X	40
GS h	Set bar code height		X	40
GS k	Print bar code	X		40
GS w	Set bar code width		X	42
GS v 0	Print raster bit image	X		42
FS p	Print NV bit image	X		43
FS q	Define NV bit image		X	44

Table 4.1- Command List.

30/65