Epson TK14 operation manual GS T n, Printing position, GS V m, Font, GS H, GS k

FENIX IMVICO				TK14 OPERATION MANUAL
GS T n
[Name]	Set print position to the beginning of print line
[Format]	ASCII	GS	T	n
	Hex	1D	54	n
	Decimal	27	84	n
[Range]	n = <00>H or n = <01>H
[Description]	Sets the print position to the beginning of print line.

•n specifies the data processing in the print buffer.

	n	Printing position
	<00>H	Sets the print position to the beginning of print line after deleting all
		data in the print buffer.
	<01>H	Sets the print position to the beginning of print line after printing all data
		in the print buffer.
GS V m
[Name]	Feeds paper to the passive cutter line.
[Format]	ASCII	GS	V	m
	Hex	1D	56	m
	Decimal	27	86	m
[Range]	m = <01>H
[Notes]

•There are 26 mm of distance between the thermal head line and the passive cutter line. This command arranges the ticket to be cut, feeding paper automatically.

•This command is effective only when processed at the beginning of a line. Afterwards the ticket is cutting by the user, the printer feeds the paper back to the

printing position.

•Sending this command, user informs to TK14 that actual ticket is completely finished; so TK14 can make internal controls to right performance.

GS f n

[Name]	Select font for Human Readable Interpretation (HRI) characters
[Format]	ASCII		GS	f	n
	Hex		1D	66	n
	Decimal		27	102	n
[Range]	n = <00>H or <01>H
[Description]	Selects a font for the HRI characters used when printing a bar code.
	n selects a font from the following table:
		n	Font
		<00>H	Font A (12x24)
		<01>H	Font B (8x16)
[Notes]	• HRI indicates Human Readable Interpretation
	• HRI characters are printed at the position specified by GS H.
	• HRI characters are always printed at X-Scale = 1 and Y-Scale = 1
[Default]	n = <01>H
[Reference]	GS H, GS k

39/65