Epson TK14 operation manual ESC M, GS !, Appendix a, Esc Esc @, Esc !, Esc G

FENIX IMVICO TK14 OPERATION MANUAL

•If this command is not received at the beginning of a line, and the character font is to be changed, all previous data in the print buffer is printed and the ticket is placed at the beginning of the next line..

[Default]	n = <00>H
[Reference]	ESC M, GS !, APPENDIX A
ESC 2
[Name]	Select default line spacing
[Format]	ASCII	ESC	2
	Hex	1B	32
	Decimal	27	50
[Description]	Selects 0.93 mm (15 x 0.0625 mm) line spacing.
[Reference]	ESC 3.
ESC 3 n
[Name]	Set line spacing
[Format]	ASCII	ESC	3	n
	Hex	1B	33	n
	Decimal	27	51	n
[Range]	<00>H ≤ n ≤	<FF>H
[Description]	Sets the line spacing to [n x 0.0625 mm].
[Default]	n = 15
[Reference]	ESC 2
ESC @
[Name]	Initialize printer
[Format]	ASCII	ESC	@
	Hex	1B	40
	Decimal	27	64
[Description]	Clears the data in the print buffer and resets the printer settings to the settings that were
	in effect when the power was turned on.
[Notes]	The data in the receiver buffer is not cleared.
ESC E n
[Name]	Turn emphasized mode on/off
[Format]	ASCII	ESC	E	n
	Hex	1B	45	n
	Decimal	27	69	n
[Range]	0 ≤ n ≤ 255
[Description]	Turns emphasized mode on or off
	When the LSB of n is 0, emphasized mode is turned off.
	When the LSB of n is 1, emphasized mode is turned on.
[Notes]	Only the least significant bit of n is enabled.

•This command and ESC ! turn on and off emphasized mode in the same way. Be

	careful when this command is used with ESC !.
[Default]	n = 0
[Reference]	ESC !, ESC G
ESC G n
[Name]	Turn on/off double-strike mode
[Format]	ASCII	ESC	G	n
	Hex	1B	47	n
	Decimal	27	71	n
[Range]	0 ≤ n ≤ 255
[Description]	Turns double-strike mode on or off.
	When the LSB of n is 0, double-strike mode is turned off.
	When the LSB of n is 1, double-strike mode is turned on.
[Notes]	Only the lowest bit of n is enabled.
	• Printer output is the same in double-strike mode and in emphasized mode.
[Default]	n = 0
[Reference]	ESC E

34/65