Manuals / Epson / Computer Equipment / Printer

Epson TM-U200 manual Paper Specifications, Paper feed method, Paper feed pitch, Paper feed speed

Models: TM-U200

1 55

Download 55 pages 9.25 Kb

Page 50

Paper Specifications

Paper feed method:	Friction feed
Paper feed pitch:	Default 4.233 mm (1/6 inch)
	Can be set in units of 0.176 mm (1/144
	inch) by the ESC 2 and ESC 3
	commands.
Paper feed speed:	Approximately 25 lines/second (4.17
	inches/second) (continuous feeding)
Paper size and weight:	Normal paper (single-ply)
	Size:	Width 76 mm ± 0.5 mm
		(3.0" ± 0.02")
	Maximum	83 mm (3.27")
	outside
	diameter:
	Core:	Paper rolls that have the
		paper glued or taped to
		the core can cause a paper
		jam. If you use a paper
		roll with the paper glued
		or taped to the core, be
		sure to use the optional
		near end detector.
	Thickness: 0.06 to 0.085 mm (.0024 to
		.0033")
	Weight:	52.3 to 64.0 g/m2 (13.9 to
		17 lbs) (45 to 55 Kg (20.41

to 24.94 lbs)/1000 sheets/ 1091 mm ✕ 788mm (43.00" ✕ 31.02")

Reference Information 4-3

Image 50

Epson TM-U200 manual Paper Specifications, Paper feed method, Paper feed pitch, Paper feed speed

Contents

TM-U200 Series Type a TM-U200 Series Printer parts and Labels Everything in this manual applies to the TM-U210 printerControl panel Instruction LabelPage FCC Class a FCC Compliance StatementDeclaration of Conformity IiiFeatures IntroductionSetting Up and Using About This ManualUsing the Printer Selecting the Place Setting Up the PrinterUnpacking See the Note on page 1-5 for information on the screws2Setting Up the Printer Attaching the Paper Roll Near-End Detector OptionDistance a 4Setting Up the Printer Connecting the Printer to the Computer Model with Serial InterfaceModel with Parallel Interface Connecting the Printer to the Drawer6Setting Up the Printer Model with Serial Interface Parallel Interface 8Setting Up the Printer Den Drucker an die Lade anschließenGrounding the Printer Connecting the Power Supply 10Setting Up the PrinterSetting Up the Printer Use the Epson ERC-38 ribbon cassette for your printer Installing the Ribbon Cassette12Setting Up the Printer Page 14Setting Up the Printer Installing the Paper Roll Insert the paper roll Open the auto cutter by pulling the tab up and toward you 18Setting Up the Printer Tab Receipt paper 20Setting Up the Printer Running the Self TestSetting the DIP Switches CompletedModel with Serial Interface DIP-Switch Functions 22Setting Up the PrinterModel with Parallel Interface DIP-Switch Functions Replace the DIP switch cover and secure it with the screw Using the Power Switch Cover 26Setting Up the Printer Affixing the Fastening Tape OptionButton SwitchOperating the Control Panel Paper near-end detector is an option Indicator lights2Using the Printer Page Printing problems TroubleshootingGeneral problems Error light is blinking and the printer does not printPrinter sounds like it is printing, but nothing is printed Error light is off, but nothing is printed2Troubleshooting Printout is faintRemoving jammed paper Line of dots is missing in the printout4Troubleshooting Page 6Troubleshooting Hexadecimal Dump 8Troubleshooting AbcdefghPrinting Specifications Characters Character SpecificationsNumber Character structurePaper feed method Paper SpecificationsPaper size and weight Normal paper single-ply Paper feed pitch4Reference Information Electrical Specifications Safety and EMI Standards AppliedPrint head ReliabilityLife Mechanism Auto cutterHumidity TemperatureEnvironmental Conditions Output signal voltage Interface SpecificationsDrawer Kick-out Specifications Output current