Manuals / Epson / Computer Equipment / Printer

Epson TM-U200 manual Indicator lights, Paper near-end detector is an option, 2Using the Printer

Models: TM-U200

1 55

Download 55 pages 9.25 Kb

Page 38

Indicator lights

The control panel lights provide information on printer conditions.

POWER (Green)

The POWER light is on when printer power is on.

PAPER OUT (Red)

This light is on when the paper roll is at the end or near the end.

This light blinks in the following cases. When it blinks, press the FEED button.

❏In the self-test standby mode

Note:

The paper near-end detector is an option.

ERROR (Red)

This light is on when the printer is off line. It blinks to indicate an error condition.

The blinking pattern shown below indicates that the temperature of the print head is too high. The printer recovers automatically and resumes printing when the head cools.

Approximately 160 ms

If the printer stops working and the ERROR light is blinking, turn the printer off, check for jammed paper, and remove it by following the instructions on page 3-3, if necessary. Then turn the printer back on. If the printer still does not work, unplug the power supply cord from the outlet immediately; then contact a qualified service person.

2-2Using the Printer

Image 38

Epson TM-U200 manual Indicator lights, Paper near-end detector is an option, 2Using the Printer

Contents

TM-U200 Series Type a TM-U200 Series Printer parts and Labels Everything in this manual applies to the TM-U210 printerControl panel Instruction LabelPage FCC Class a FCC Compliance StatementDeclaration of Conformity IiiFeatures IntroductionSetting Up and Using About This ManualUsing the Printer Selecting the Place Setting Up the PrinterUnpacking See the Note on page 1-5 for information on the screws2Setting Up the Printer Attaching the Paper Roll Near-End Detector OptionDistance a 4Setting Up the Printer Connecting the Printer to the Computer Model with Serial InterfaceModel with Parallel Interface Connecting the Printer to the Drawer6Setting Up the Printer Model with Serial Interface Parallel Interface 8Setting Up the Printer Den Drucker an die Lade anschließenGrounding the Printer Connecting the Power Supply 10Setting Up the PrinterSetting Up the Printer Use the Epson ERC-38 ribbon cassette for your printer Installing the Ribbon Cassette12Setting Up the Printer Page 14Setting Up the Printer Installing the Paper Roll Insert the paper roll Open the auto cutter by pulling the tab up and toward you 18Setting Up the Printer Tab Receipt paper 20Setting Up the Printer Running the Self TestSetting the DIP Switches CompletedModel with Serial Interface DIP-Switch Functions 22Setting Up the PrinterModel with Parallel Interface DIP-Switch Functions Replace the DIP switch cover and secure it with the screw Using the Power Switch Cover 26Setting Up the Printer Affixing the Fastening Tape OptionButton SwitchOperating the Control Panel Paper near-end detector is an option Indicator lights2Using the Printer Page Printing problems TroubleshootingGeneral problems Error light is blinking and the printer does not printPrinter sounds like it is printing, but nothing is printed Error light is off, but nothing is printed2Troubleshooting Printout is faintRemoving jammed paper Line of dots is missing in the printout4Troubleshooting Page 6Troubleshooting Hexadecimal Dump 8Troubleshooting AbcdefghPrinting Specifications Characters Character SpecificationsNumber Character structurePaper feed method Paper SpecificationsPaper size and weight Normal paper single-ply Paper feed pitch4Reference Information Electrical Specifications Safety and EMI Standards AppliedPrint head ReliabilityLife Mechanism Auto cutterHumidity TemperatureEnvironmental Conditions Output signal voltage Interface SpecificationsDrawer Kick-out Specifications Output current