Ergotron CRT Monitor manual Bases for Command Posts, Mounting Kits for Command Posts

Mounting Systems

Bases for Command Posts

Base for

Command Post

Select the appropriate Base for your post when mounting to floor or ceiling.

Part	Description	Dimensions	Compatible with
Number		H x W x D	Post(s)…
60-360-000	Base, for	7" x 17" x 17"	20-075-000, 20-076-000
	3" x 3" Post	(178 x 432 x 432 mm)	20-077-000
60-138-000	Base, for	8" x 18" x 18"	20-078-000
	4" x 4" Post	(203 x 457 x 457 mm)
90-018	Hardware Kit for Base	3/8" dia. x 3-3/4" long
	(4) concrete stud anchors	(9.5 x 95 mm)

90-018, Hardware Kit for Base for attaching base to concrete surface

Note: Mounting 2" x 2" Post to floor or ceiling is not recommended in applications using CRT Monitor Arms.

Note: Order the Hardware Kit for Base when attaching to a concrete surface.

Caution: Surface construction varies and the ultimate mounting method you use to attach an Ergotron mounting system is out of Ergotron’s control. It is important to consult with the appropriate local engineering, architectural, or construction personnel to ensure that an Ergotron mounting system is mounted properly to handle applied loads.

Base shown in floor mount application

Base upside down for ceiling application

Base can be mounted at any height on Post

Customer provided threaded rod used to anchor Base above or below a false ceiling

Mounting Kits for Command Posts

Mounting Kit for attaching post to vertical surface

Select the appropriate Mounting Kit when mounting your post to a vertical surface, like a machine or workbench.

Part	Description	Compatible with
Number		Post(s)…
97-012-000	Mounting Kit, for	20-143-000
	2" x 2" Post
97-011-000	Mounting Kit, for	20-075-000, 20-076-000
	3" x 3" Post	20-077-000

Note: If mounting 4" x 4" Post to a vertical surface, fasteners to be supplied by customer.

Brackets for Mounting Monitor Arms to Command Posts

Brackets are required for mounting monitor arms to posts. All vertical-mount arms are compatible with these brackets. Order brackets according to post size.

Part	Description	Dimensions	Arm Mounting
Number		W x H	Hardware included…

4" x 4" Post

60-155-000

Extender Arm

60-153-000	Bracket for Arm,	4-5/8" x 6-1/2"	(4) 3/8"–16 x 3/4"
	2" x 2" Post	(117 x 165 mm)	flat socket head
60-154-000	Bracket for Arm,	5-3/4" x 5-3/8"	(4) 3/8"–16 x 3/4"
	3" x 3" Post	(146 x 137 mm)	flat socket head
60-155-000	Bracket for Arm,	6-7/8" x 6-3/8"	(6) 3/8"–16 x 3/4"
	4" x 4" Post	(175 x 162 mm)	flat socket head

Multiple arms, extenders or components can be mounted to Command Post by stacking and offsetting brackets

14 • CRT Monitor Mounting Solutions Orderguide • rev. 05/13/04 870-03-018