ZyXEL Communications U-336R/RE manual Class 2.0 Command Set, +FCC=vr,br,w, d,ln,df,ec,bf,st

Class 2.0 Command Set

Command Syntax	Description
+<command>=<value>	Execute a command or set a parameter.
+<command>=?	Read permissible settings.
+<command>?	Read the current setting.

Supported Commands

Command	Value	Description
+FAA=n		Auto-answer mode parameter:
	n=0	DCE answers as set by +FCLASS.
	n=1	DCE answers and auto-determines call
		type.
+FBO=n		Phase C data bit order:
	n=0	Select direct bit order.
	n=1	Select reversed bit order in receiving
		mode for phase C data.
+FBS?		Buffer size parameter; read only.
+FCC=vr,br,w		DCE capability parameter. Refer to
d,ln,df,ec,bf,st		+FDCC command in Class 2 for parameter
		settings.
+FCLASS=n		Service class selection. Refer to
		+FCLASS Class 1 command in previous
		section.
+FCO		DCE response fax connection made.
+FCQ=<rq>,		Copy quality check capability parameter
<tq>
	rq=0	DCE Receive Copy Quality Checking
		disabled.
	rq=1	DCE Receive Copy Quality Checking
		enabled.
	rq=2	DCE Receive Copy Quality Correction
		enabled.

Fax Operation 63