ZyXEL Communications U-336R/RE manual value, +FCIG=string, Command Syntax, Description, Value

Command Syntax	Description
+<command>=<value>	Execute a command or set a parameter.
+<command>=?	Read permissible settings.
+<command>?	Read current setting.

Supported Commands (per TIA PN2388 8/20/90)

Command	Value	Description
+FAA=n		Auto-answer mode parameter:
	n=0	Answer as set by +FCLASS.
	n=1	DCE answers and auto-determines
		type.
+FBADLIN=	0-255	Bad line threshold (number of
<value>		consecutive bad lines for a bad page
		parameter):
		Determine if Copy Quality OK on the
		T.30 flow chart . <value>=0 to 255; a
		value of 0 implies that error checking
		is disabled.
+FBOR=n		Phase C data bit order:
	n=0	Select direct bit order.
	n=1	Select reversed bit order in receiving
		mode for phase C data.
+FBUF?		Buffer size; read only parameter:
		Allow DTE to determine the
		characteristics of the DCE’s buffer
		size.
+FCIG="string"		Local fax station ID string, for polling
		Rx.
+FCLASS=n		Service class selection: Refer to
		+FCLASS Class 1 command in
		previous section.
+FCON		DCE responds fax connection .
+FCQ=n		Copy quality check capability

Fax Operation 57