ZyXEL Communications U-336R/RE manual Extended S-Registers ATSn=x

Command	Function & Description	+Ref.
	“W” dial modifier to wait for the dial tone.
	(See also S41b4)
S7=	Set duration, in number of seconds modem	+060
	waits for a carrier.
S8=	Set duration, in seconds, for pause (,) option in	+002
	Dial command and pause between command
	re-executions for Repeat (>) command.
S9=	Set duration, in tenths of a second of remote	+006
	carrier signal before recognition (Ignored if in
	non-FSK or half-duplex operation).
S10=	Set duration, in tenths of a second, modem	+007
	waits after loss of carrier before hanging up.
S11=	Set duration and spacing, in milliseconds, of	+070
	dialed Touch-Tones.

Extended S-Registers "ATSn=x"

Command	bit	dec	hex	Function and description	Ref.
S13=	bit	dec	hex	Bit-mapped register.	+000
	1	2	2	Capture modem
				manufacturer information
				during V.42 handshake, can
				be displayed at ATI2 <Last
				Speed/Protocol> line if
				available (‘Flash’ or ‘
				ZyXEL’ stands for ZyXEL
				connection).
S14=	bit	dec	hex	Bit-mapped register:	+002
	0	0	0	Modem auto-handshake on	*M0
				Originate mode.
		1	1	Modem auto-handshake on	*M1
				Answer mode.
	1	0	0	Grant Remote Digital Loop-	&T4

Status Registers & Result Codes 93