ZyXEL Communications U-336R/RE manual Fax Reception from a BBS, String, Error Level, Fax Operation

Fax Reception from a BBS

Your modem can automatically detect data and fax calls and allow BBS software to receive faxes on the same phone line. To allow your BBS to receive incoming faxes, make the following set-up changes in your BBS:

1.Add the string #B1+FCLASS=6 to the init string. Be sure the +FCLASS=6 command is the last command.

2.Change one of the messages in the list to CONNECT FAX.

3.Set the external mail string to ZyXEL and give it an error level.

4.In your BBS batch file, if the error level matches the external mail, execute

rcvfax 2 /p:comport [/w:workpath]

This setting will enable the BBS to receive a fax and store it automatically.

The following is a sample setting for the Front Door system.

∙Add these commands to the init string:

X7#B1+FCLASS=6

∙Change the connection message to:

300	CONNECT	4800	CONNECT 4800
1200	CONNECT 1200	9600	CONNECT 7200
1275	CONNECT FAX	19200	CONNECT 9600
2400	CONNECT 2400	38400	CONNECT
			14400

∙Set external mail as:

String

Error Level

Fax Operation 75