readily available as PD, shareware or commercial software. One of the most powerful shareware programs available is ZTerm.

Fewer programs are available to make use of the ZyXEL's fax features. One program which has found wide acceptance is FaxSTF which can be installed like a printer driver allowing you to send faxes from almost any program which runs on your Macintosh. At the same time it allows automatic fax receiving. This program includes powerful line manager software which makes sure fax software does not interfere with other programs using the serial ports. If the modem is turned off when you start your Macintosh with the line manager activated, the computer may seem to freeze for a few minutes. During this time the line manager software tries to locate and to set up the modem. Turn on your modem before you start your Macintosh to avoid this delay.

MaxFax is another fax software for Macintosh computers.

Drivers are available which allow use of the serial ports at speeds up to 230.4 Kbps. These drivers are currently available for Power Macs and AV Macs only.

Helpful Hints for UNIX-Based Computers

Serial Cable

Consult the documentation that came with your workstation to find the part number of, or information on, how to make a serial cable for your workstation. The cable should be a hardware-handshaking type. Refer to Chapter 12 Terminal Pinouts for a complete list of signals provided for the modem’s serial port.

Basic Modem Settings for UNIX

Unix environments usually don’t like modem responses or echoing of commands. Therefore you should set ATE0Q1.

Basic Modem Operation 27

Page 39
Image 39
ZyXEL Communications U-336R/RE manual Helpful Hints for UNIX-Based Computers, Serial Cable, Basic Modem Settings for Unix