ZyXEL Communications U-336R/RE manual Command, Value, Response, Function and Description

Command		Value	Description
		0-64	with negotiated number of pixels)
		(HEX	required for a page considered
		value)	acceptable. The percentage of good lines
			would be computed by the equation:
			100 x (<lc> - <bl>) / <lc>
			lc: total line count as reported in the
			+FPS: response.
			bl: bad line count as reported in the
			+FPS: response.
			If the resulting value is less than the value
			in <pgl>, the page is unacceptable.
		cbl=	Specify the maximum tolerable number of
		0-FF	consecutive bad lines. If this value is
		(HEX	exceeded for a given page, the DCE shall
		value)	consider the page unacceptable.
+FSP=n			Enable polling command:
		n=0	Disable polling.
		n=1	Enable polling.
Class 2.0 Command Responses
Response	Value		Function and Description
+FCI:"CSI ID			Report remote ID response, Called Station
string"			ID.
+FCO			Fax connection established response.
+FCS:vr,br,w			negotiated session parameters (DCS
d,			frame information) response. Refer to
ln,df,ec,bf,st			+FIS= comnd.
+FET:<ppm>			Post page message response:
	ppm=0		Another page next, same document.
	ppm=1		Another document next.
	ppm=2		No more pages of documents.
	ppm=3		Another page next, same document,

Fax Operation 67