Command | Function |
#C2 | Set minimum scan line time capability of the |
| receiver: 10 ms at 3.85 line/mm, T(7.7)=T(3.85). |
#C3 | Set minimum scan line time capability of the |
| receiver: 20 ms at 3.85 line/mm, T(7.7)=1/2 |
| T(3.85). |
#C4 | Set minimum scan line time capability of the |
| receiver: 40 ms at 3.85 line/mm, T(7.7)=T(3.85). |
#C5 | Set minimum scan line time capability of the |
| receiver: 40 ms at 3.85 line/mm, T(7.7)=1/2 |
| T(3.85). |
#C6 | Set minimum scan line time capability of the |
| receiver: 10 ms at 3.85 line/mm, T(7.7)=1/2 |
| T(3.85). |
#C7 | Set minimum scan line time capability of the |
| receiver: 0 ms at 3.85 line/mm, T(7.7)=T(3.85). |
#P<string> | Set local phone number to the phone number |
| following the character 'P' can store up to 25 |
| characters. The modem will exchange this phone |
| number with the remote fax machine during initial |
| handshaking. |
Status Report Result Codes
When your modem is in fax mode, each ATD or ATA command will try to establish a fax connection. Your modem will send a status report result code back to the DTE (computer).
NO DIAL | Tried to dial but no dial tone is detected. |
TONE |
|
NO CARRIER | Handshake fails or no carrier is detected or |
| |
BUSY | Other party's phone line is busy. |
NO ANSWER | Quiet answer is not detected before |
