ZyXEL Communications U-336R/RE manual Fax Operation, Command, Value, Description

Command	Value	Description
	tq=0	DCE Transmit Copy Quality Checking
		disabled.
	tq=1	DCE Transmit Copy Quality Checking
		enabled.
	tq=2	DCE Transmit Copy Quality Correction
		enabled.
+FCR=n		"Capability to receive" parameter
	n=0	DCE will not receive message or poll a
		remote device.
	n=1	DCE receives message data or polls a
		remote device
+FCT=n	0-255	DTE phase C time-out parameter. n=0-
		255, 1s units.
+FDR		Receive phase C data command initiates
		document reception
+FDT		Transmit phase C data command:
		releases the DCE to proceed with
		negotiation
+FEA=n		Phase C received EOL alignment
		parameter
	n=0	Determine that T.4 EOL patterns are bit
		aligned (as received).
	n=1	Determine that the last received bits of
		T.4 EOL patterns are byte aligned by the
		DCE, with necessary zero fill bits
		inserted.
+FIE=n		Procedure interrupt parameter
	n=0	Procedure interrupt requests from the
		remote station are ignored, and not
		reported to the DTE.
	n=1	Procedure interrupt requests from the
		remote station are accepted, negotiated

64 Fax Operation