ZyXEL Communications U-336R/RE Options, Function & Description, AT Command Set Summaries

Command	Options	Function & Description	Ref.
	*M1	Set to Answer mode.
*Pn	n=0-15	Set leased line transmission power	S17.1-4
	*P11 * level; ranges from 0 dBm to -15
		dBm (default: -11 dBm) (see also
		S35.3).
*Qn		Action taken when line quality	S27.6-7
		changes.
	*Q0	No action to poor signal quality.
	*Q1	Retrain action taken if signal quality
		is poor. (See also S41.2)
	*Q2 *	Adaptive rate, automatic fall-back or
		forward.
	*Q3	Disconnect if signal quality is poor.
*Rab		Read remote profile “b” to local user	S36.1
	a=0-3	Local user profile number “a”.	S37.4-7
	b=0-3	Remote user profile number “b”.	S37.0-3
	b=4	Remote active configuration.
	b=5	Remote factory default
		configuration.
*T		Recall the last CND (Caller ID)	S40.2
		information..
*V		View the Password table.
*Wab		Write local configuration profile “a”	S36.1
		to remote user profile “b” and reset
		remote modem from profile “b”.
	a=0-3	Local user profile number “a”.	S37.4-7
	a=4	Local active configuration.
	a=5	Local factory default configuration.
	b=0-3	Remote user profile number “b”.	S37.0-3

The AT+F commands are located in the chapter 7.

AT Command Set Summaries 91