ZyXEL Communications U-336R/RE manual +FDCC=vr,br,wd, Ln,df,ec,bf,st

Command	Value	Description
		parameter.
	n=0	No copy quality check capability.
	n=1	Only check 1D phase C data.
	n=2	Check both 1D and 2D phase C data.
+FCR=n		"Capability to receive" parameter
	n=0	DCE will not receive message data or
		poll a remote device.
	n=1	DCE receives message data or polls a
		remote device.
+FDCC=vr,br,wd		DCE capabilities parameters.
,ln,df,ec,bf,st
	vr=0	Vertical resolution: Normal; 98 lpi.
	vr=1	Vertical resolution: Fine; 196 lpi.
	br=0	Bit rate: 2400 bit/s; V.27ter.
	br=1	Bit rate: 4800 bit/s; V.27ter.
	br=2	Bit rate: 7200 bit/s; V.29 or V.17.
	br=3	Bit rate: 9600 bit/s; V.29 or V.17.
	br=4	Bit rate: 12000 bit/s; V.17.
	br=5	Bit rate: 14400 bit/s; V.17.
	wd=0	Page width: 1728 pixels in 215mm.
	wd=1	Page width: 2048 pixels in 255mm.
	wd=2	Page width: 2432 pixels in 303mm.
	ln=0	Page length: A4; 297mm.
	ln=1	Page length: B4; 364mm.
	ln=2	Page length: unlimited length.
	df=0	Data compression format: 1-D;
		modified Huffman.
	df=1	Data compression format: 2-D;
		modified Read.
	ec=0	Error correction disabled.
	ec=1	Enable error correction mode.

58 Fax Operation