Ericsson 230i manual Can I set a new PIN code?, Seconds, or it switches itself off again. Why?

signal. Why not?

If you can see the ring off icon, it means that the volume of the ring signal has been set to zero, or the ring signal is switched off temporarily. If the ring sig- nal has been switched off temporarily, it comes back on when you hang up.

For increasing the volume of the ring signal, see “Ring volume” on page 19.

What should I do if the handset dials a number as soon as I press a key?

A direct call has been set. See “Direct call” on page 25.

I have called an interactive service but it does not respond to my key presses. What is wrong?

The tones transmitted by the handset may be too short for this interactive serv- ice. For using longer tones see “Setting the handset to long tones” on page 19.

What should I do if I do not hear anything when I pick up the

handset and the red light on the base station is flashing?

V

The base station is not properly connected to the telephone line. Check the

telephone line connection to the base station and ensure that the cable that

came with the set is used.

s

B

I cannot understand the language in the display. Why?

An incorrect language has been selected.

e

rk

Us

etwo

To correct this:

1.

Press C L R.

The handset returns to the standby display.

2.

Press the D O W N key 2x then press Y E S . Press the U P

key 3x, and press

Y E S to confirm. Use the U P or D O W N keyNto scroll to the language of

your choice from the list and press Y E S .

e

ercial

il

I have entered an incorrect PIN code three times in a row. How

m

b

can I set a new PIN code?

If you have entered an incorrect PIN code three times in a row, the current

m

code is invalidated. To reset Mothe PIN code, see “Resetting the base station PIN

code” on page 23 and “Resetting the handset PIN code” on page 23.

Co

I cannot switch onssthe handset by pressing N O for at least two

e

seconds, or it switches itself off again. Why?

for

n

Place the handseti in the base station. If the display comes on, the battery is

t

almost flat.sLeave the handset in the base station to charge the battery. If the

display remains off after charging, the handset is defective or the battery is not

No

properly connected or may need replacing. See “Battery” on page 9.

Bu

I have placed the handset in the base station but the green

n

o

charging light does not come on. Why?

Ensure that the handset is placed properly in the base station and the base sta-

ss

tion is on. If the battery is completely flat, leave the handset in the base station

to charge the battery. The green charging light will turn on after a few

c

minutes.

ri

E

I know that someone is calling me, but I cannot hear the ring

32Reference