Now you have prepared the FWT for wall installation. Please, follow the instructions below for complete wall installation.
Installing the FWT on the Wall
FWT Location
The GSM signal strength available at the FWT location affects the per- formance of the unit. The stronger the GSM signal, the better the FWT performance.
Tip: Test several potential locations by moving the FWT while looking at the Radio LED. Select the location where the Radio LED is continuous steady, or the location with the highest amount of flashes.
Note: Moving the FWT as little as 20 cm can affect the GSM reception quality.
|
|
|
| Location Testing | |
|
|
| |||
Number of Radio LED flashes |
| Location status | |||
|
|
|
|
|
|
0 | OFF |
|
|
| Unacceptable |
|
|
|
|
|
|
1 | - | - | - |
| Acceptable |
|
|
|
|
|
|
2 | - - | - - | - - |
| Good |
|
|
|
|
| |
3 | - - - | - - - - - - |
| Very Good | |
|
|
| |||
Continuously ………………… |
| Excellent | |||
|
|
|
|
|
|
Please consider the following recommendations:
•Always select an indoor location, preferably close to a window and as high as possible in the building. Generally, you will experience better GSM signal strength in these places.
•Do not install the FWT in a wet or damp location.
•Do not install the FWT in an outdoor location.
•Do not install the FWT on walls or in rooms that contain large amounts of metal, steel or wiring.
•Do not expose the FWT to extreme temperatures (near radiators, cooling vents, etc).
If you experience poor reception quality, an outdoor antenna may im- prove reception. Please refer to the topic Accessories documented on
page 68 for more detailed information,
Fixed Wireless Terminal: G32 & G36 | 13 |
