Ericsson GH198 Ringing Signal Volume, Key Clicks, Silent Keypad or Dtmf Signals, Call Forwarding

0.Ringing Signal Volume

You can set the level of the ringing signal in four steps, or turn the ringing signal OFF.

1.Press M, followed by 0.

‘‘RING LEVEL’’ is displayed, together with the current setting, either:

#-----(lowest level)

##----

###-

#### (highest level)

--------(turned OFF)

2.Press any numeric key (repeatedly) to set the ringing signal level, or turn the ringing signal OFF. Each of the four levels is accompanied by an audible ringing signal.

3.Store the new setting by pressing S, ▲ or ▼.

1.Key Clicks, Silent Keypad or DTMF Signals

You can decide that DTMF signals will be sent if the numeric keys 0 -- 9, * and # are pressed when a call is in progress. See also the chapter DTMF Signalling earlier in this manual.

On the other hand, if you do not wish DTMF signals to be sent, you can decide whether key clicks or nothing at all will be heard when you press the keys (silent keypad).

1.Press M, followed by 1. The current setting is displayed, either:

‘‘CLICK ON’’ or ‘‘SILENT’’ or

‘‘DTMF ON’’

2.Select the desired setting by pressing any numeric key (repeatedly).

3.Store the new setting by pressing S, ▲ or ▼.

If you select the Silent Keypad setting, the error signal will be turned off, too.

2.Call Forwarding

This facility is not available unless you have subscribed to it. You should also read the operating instructions from your network operator.

You can decide that incoming calls will be forwarded (diverted) to another number:

●if you are busy (engaged in a call).

●if you do not answer.

●if your phone is unreachable ( or turned off). You can also forward all calls.

This Special Function lets you activate or cancel one or more of the above services. You can also review whether a particular service is activated or not.

3