Quick Start Guide: Connect-Power-Configure

•The unit will automatically decode the first two audio components that it finds within the selected service.

•Alternative audio components may be selected from the service tab on the Web Control interface.

3.7Configuring for Single-service Decryption

When configuring for Single-service Decryption the following points should be observed:

•If the service selected for video decode contains encrypted components these components will automatically be decrypted by the unit.

•The outgoing feed from the unit will contain these decrypted components providing the TS feed on the Output tab on the Web Control interface is set to descrambled.

3.8Configuring for Multi-service Decryption

When configuring for Multi-service Decryption the following points should be observed:

•With Director Multi-service Decryption, when a feed containing more than one encrypted service is applied to the unit, the first 24 services detected are automatically decrypted. A list of these services can be found in the service table on Services Menu.

•With Common Interface Multi-service Decryption, when a feed with more than one encrypted service is applied to the unit, the user may choose how it is decrypted using the Maximum CAM Services, Maximum CAM Components and Maximum CAM Components Per Service dialog boxes. The user should refer to the CAM vendor for CAM compatibilities before setting this up.

•This list may be modified from the CA tab on the Web Control interface.

Note: This is only applicable for units/models that have Multi-service Decryption licenses enabled.

16 (44)

EN/LZT 790 0009 R1A 2011-03-30