Escient DVDM-100 user manual Setting the Screen Saver Preferences, Activation Idle Time

Models: DVDM-100

1 107
Download 107 pages 31.64 Kb
Page 67
Image 67

SETTING USER PREFERENCES

User preferences are available to specify global configuration options and preferred system settings. Press the SETUP key on the remote control to display the Setup Menu. Use the navigation keys on the remote control (up, down, left, and right) to highlight and select any menu item.

SETTING THE SCREEN SAVER PREFERENCES

Screen Savers are provided for each source mode. Screen Savers provide two important functions, to prevent a static image from being displayed on the video output device for extended periods of time and to provide useful information to the user when activated.

Follow these steps to set your screen saver preferences:

1.Press the SETUP key on the remote to display the Setup menu.

2.Select the GENERAL Menu

3.Select the SCREEN SAVER Menu

4.Select your Screen Saver Preferences

Activation Idle Time

You can specify the amount of idle time that FireBall will wait before activating the screen saver from 1 to 60 minutes.

Warning: Some televisions and plasma monitors are more susceptible to screen burn-in than others, therefore, we recommend using a low activation time (like 1 minute) to reduce the risk of burn-in.

Other Modes

Select either the Normal, or Product Demo. The Normal mode displays the current title or station information while the Product Demonstration mode is intended for retail product demos during idle time.

PAGE 67

FireBall™ DVDM-100 User’s Manual

Page 67
Image 67
Escient DVDM-100 user manual Setting the Screen Saver Preferences, Activation Idle Time