Whirlpool SF375PEE warranty Setting the Controls, Example for 4 hours, 30 minutes

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

1.Press the auto clean pad.

The clean indicator light will light up.

This will automatically set a 31⁄2-hour Self- Cleaning cycle.

NOTE: There will be a 30-minute cool-down 1⁄2 hour before the cycle is over.

PRESS YOU SEE

AUTO

CLEAN

ON

2.Set the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 31⁄2 hours, use the hour and minute pads to set the cleaning time you want. Press the “up” (s) or “down” (t) pad(s) until a time between 21⁄2-41⁄2hours shows on the display.

•Use 21⁄2 hours for light soil.

•Use 31⁄2-41⁄2hours for average to heavy soil.

PRESS YOU SEE ON

TEMP

TIME

(example for 4 hours, 30 minutes)

3. Start the oven. PRESS YOU SEE

NOTE: The on and heat indicator lights will

ON

light up.

START

ENTER

5 SEC

4. After Self-Cleaning cycle starts:	YOU SEE	ON
The door locked indicator light will light up when
the oven door locks.
NOTE: If you open the door before starting the
Self-Cleaning cycle, “door” will show on the
display. If you do not close the door within
5 minutes, the cycle will be canceled.
5. After Self-Cleaning cycle ends and the oven	YOU SEE
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out.
Press the off/cancel pad to clear the display.	PRESS
	OFF
	CANCEL

24