USING YOUR RANGE

BAKING/ROASTING (CONT.)

5.Press the start/enter pad.

A preheating time will count down on the display. The heat, bake, and on indicator lights will light up. The oven control automatically sets preheat- ing times based on the oven temperature you select:

For 245°F and less, the preheating time is 4 minutes.

For 250°F-445°F, the preheating time is 10 minutes.

For 450°F and above, the preheating time is 15 minutes.

The oven is preheated and ready to use when you hear a 1-second tone, the on indicator light goes off, the countdown is finished, and the set temperature is displayed.

The preheat and set temperatures may be different at the end of the countdown. This is normal.

NOTES:

PRESS

START

ENTER

5 SEC

YOU SEE

ON

(example for set temperature of 350°F)

When the oven temperature is greater than 170ºF, no preheating time will be shown on the display.

You can change the temperature setting any time after pressing the start/enter pad. You do not have to press the start/enter pad again.

The preheating time will not change if you reset the temperature before the countdown time ends.

If you are baking/roasting while the minute timer is counting down, you can see the set baking/roasting temperature for 5 seconds by pressing the bake pad.

continued on next page

15

Page 15
Image 15
Whirlpool SF375PEE warranty Example for set temperature of 350F, On next