Escort EA-CR USER GUIDE Introducing the ChartReader, Multiple Downloads, Logger Variants, Page

USER GUIDE

Introducing the ChartReader

For product code and serial number information please refer to the bottom label of your ChartReader.

Multiple Downloads

The ChartReader Memory versions EJ-CR-II, EJ-CR-MEM, MN-CR-MEM, EA-CR and EI- CR-MEM support Multiple Downloads. This means more than one logger data set can be downloaded to, stored in, and printed from the ChartReader. This feature allows the ChartReader to be used in an application where there are multiple loggers in the field. Each logger can be downloaded into the ChartReader (stored as a ‘data block’) and then printed out at a later more convenient time or downloaded to a PC using the ChartReader Interface.

The ESCORT user software has the ability to download the saved ‘data blocks’ (loggers that have been download into the ChartReader) from the ChartReader and process them just as if the logger had been placed on an interface connected to the PC. Thus the User software is able to list, graph, and save them.

Note: Multiple download is enabled by default. To disable this feature please use the ESCORT user software and select ‘N’ to the ‘Enable Multiple Downloads’ option in the configuration settings (refer to the ESCORT software user manual and help menu).

Logger Variants

All variants in the Junior product range except Junior General Purpose Loggers are supported by the Junior ChartReaders with 1MB flash memory (EJ-CR-II and EJ-CR- MEM). Junior loggers with extended memory (40K) cannot be read by EJ-CR and EJ-CR 16.

The iLog ChartReader supports all versions of ESCORT iLog data loggers, including humidity loggers.

The MINI 2000 ChartReaders MN-CR and MN-CR-MEM support all versions of the MINI 2000 logger.

The Intelligent ChartReader EA-CR supports all versions of the Intelligent Mini and Wireless Mini logger.

Easy To Upgrade

Future upgrades to the ChartReader can be done via software. This will allow future variants in the product range to be easily supported by your ChartReader just by uploading new firmware via the ESCORT firmware loader software (provided by your distributor upon request).

Battery Check Function

ChartReader can tell you when it needs to have its battery charged. After selecting the Battery Check option the ChartReader will check, measure, and print the results of a battery condition test. This will give you an indication of the current battery condition before you take it out into the field.

♥ Escort Data Logging Systems LTD DATED: 03/07/07 PAGE 3