Escort MN-CR-MEM Out of Specification Readings, Description of log Sensor Type, User Guide, Page

USER GUIDE

Out of Specification Readings

Below illustrates an example for an internal sensor logger (not to scale):

Ser# 9443/0023 TRIP:4 Battery OK

Pool Water Test

-----------------------------

Internal Temp

Upper	Spec	:	30.0°C
Lower	Spec	:	20.0°C

-----------------------------

1995 01/03 16:12:29 Out of Specification Times are Sender LOCAL

01/03 06:27:29* 19.5°C 01/03 06:22:29* 19.7°C 01/03 06:17:29* 19.5°C 01/03 06:12:29* 19.2°C 01/03 06:07:29* 19.5°C

2000 Samples

-----------------------------

Above Specification:
30.0->32.0°C	: 100 mins
Above 32.0°C	: 45	mins
Below Specification:
20.0->18.0°C	: 55	mins
Below 18.0°C	: 5	mins

-------------------------------------------

Logger Serial number & trip number

Battery Status of Logger

Description of log

Sensor Type

The upper and lower specifications of the sensor

Last log time

Time zone

List of out of specification readings

Log Summary : provides breakdown of log as per the upper/lower specification & summary increment specified for the logger.

Notes

•If the logger has two sensors (such as a EJ-IE or EI-HS loggers) then the other sensor’s specifications and log summary will also appear if the sensor is enabled for logging. For EJ-IE & EJ-HS loggers, the list of out of specification readings will contain a sensor label at the beginning of each line. (“I” for internal sensor, “E” for external sensor and “H” for humidity).

•During the printing of out of specification readings, the printer may pause at times while the ChartReader scans through the logged readings in search of out of specification values.

•If during printing the paper runs out, the out of specification print indicator will flash rapidly and beep, printing will pause. The user can either install a new roll of paper and push the

print button to resume printing or press the CANCEL key to abort printing.

•In case the battery voltage drops to an unacceptable level during printing, the out of specification print indicator will flash rapidly and beep, printing will pause. The user can either plug in external power and push the print button to resume printing or press the

CANCEL key to abort printing.

♥ Escort Data Logging Systems LTD DATED: 03/07/07 PAGE 9