Changing the display mode
During playback, it is possible to change the display as shown here.
<The DISPLAY button doesn’t work during programmed playback.
Currently playing track | Elapsed time of current track | ||
|
|
|
|
|
|
|
|
|
|
|
|
Time remaining for current track
Total elapsed time (disc)
Total time remaining (disc)
Clock Mode
For highly accurate playback, you can use the word clock (sync) output of an external unit such as the Esoteric
Use the CLOCK MODE (main unit) button to switch between Word M1 ON and Word OFF.
When the unit is synchronizing to the external clock, the ring surrounding the button flashes. When it is locked, the button lights.
<Note that the sync connection should be made before the CLOCK MODE button is pressed. If no valid word sync signal is received, the display shows “No Word!”.
<This unit can respond to synchronization signals up to 176.4 kHz, and automatically changes depending on the input signal.
Mode 1 and Mode 2
When “Word M1 ON” is selected, press the CLOCK MODE button for more than 3 seconds to switch between “M1 (mode 1)” and “M2 (mode 2)”.
Typically, select M1.
M1 is more accurate and takes significantly longer to achieve lock status compared with M2. If lock status cannot be achieved (the CLOCK MODE button flashes and the display shows “WRD UNLCK!”) using M1, select M2.
16
