2) Let the leaf make contact with the full
open stop point. The opener will then stop
and leaf 2 will begin to open.
OR if not using open stops
2 alt.) Press P2 to stop the openers opening
motion and leaf 2 will begin to open.
Begin by pressing P1 6 times to light A-E simultaneously. While
the 5 LEDs are lit steadily, hold down P2 for about 3 seconds. The
operator will start the maneuver process.
Using P2, Briefly press the button once for each of the
following motion transitions:
Press for 3
Second
1) Press P2 to teach leaf 1 opening
deceleration starting point.
Without open stops, press P2
%!
With open stops, let the gate
make contact, don’t press P2
0%$