USING YOUR DISHWASHER
Quiet operating tips
To avoid thumping and clattering noises during operation:
•Make sure lightweight load items are secured in the racks.
•Make sure pot lids and handles, pizza pans, cookie sheets, etc., do not touch interior walls or interfere with the spray arm’s rotation, or cover the spray tower.
•Load dishes so they do not touch one another.
NOTE: Keep sink drain plugs inserted during dishwasher operation to prevent noise transfer through drains.
Water temperature tips
Hot water dissolves and activates the dishwashing detergent. Hot water also dissolves grease on dishes and helps dry glasses
For best dishwashing results, water must be at least 120°F as it enters the dishwasher. The dishwasher will automatically heat the water to help washing performance.
To check water temperature
1.Run hot water at the faucet closest to your dishwasher. Set a cup under the faucet, and place a candy or meat thermometer in it.
2.Run hot water for at least one minute into
the cup, allowing the water to overflow. Then check the temperature. If the water temperature is below 120°F, have a qualified person
raise the thermostat setting on your water heater.
Energy saving tips
You can help save energy if you:
•Wash full loads. Running a
•Use the Light Wash cycle whenever possible. The cycle uses less hot water and energy than the Normal Wash cycle.
•Use the Low Energy Washing option if available. The water heating in the main wash and final rinse will be reduced. NOTE: Loads may not wash as well if the water temperature is too low.
•Load correctly for best washing results. Incorrect loading may cause poor washing and the need to rewash all or part of
the load.
•Do not prerinse normally soiled dishes. Select the correct cycle for the load and use the recommended amount of deter- gent for good washing results without hand rinsing.
•Use your dishwasher during
•Use the No Heat Dry option whenever possible. Allow longer drying times (over- night). Use a rinse agent to improve drying.
15
