Estate TUD5700 warranty Using the rinse agent dispenser, Rinse agent dispenser, To check dispenser

USING YOUR DISHWASHER

Using the rinse agent dispenser

Rinse agent dispenser

Keep the rinse agent dispenser filled with a liquid rinse agent. A rinse agent greatly improves the drying of dishes by helping water flow off them during the last rinse. A rinse agent also keeps water from forming droplets and drying as spots.

Release of a small amount of rinse agent into the rinse water is automatic in the final rinse of each cycle. For best drying results, check the dispenser periodically to see if it needs refilling.

To check dispenser

Remove dispenser cap. If dispenser is empty, an “E” will be clearly visible inside the dispenser.

An “E’’ shows

when empty

The center of the fill indicator cap will be	Center will be
clear when dispenser needs refilling.	clear when
	empty

		SE	AI
	N
I				D
R					R
N
I	DICATO

To fill dispenser

You do not have to wait until the dispenser is empty to refill it, but do not overfill it. The dispenser will hold 6 ounces of rinse agent. Under normal conditions, this will last about three months.

1.Make sure the dishwasher door is fully open.

2.Remove the fill indicator cap.

3.Add rinse agent to the dispenser. Do not fill past the smallest opening in the lower part of the dispenser.

If you overfill, excess rinse agent can come out. This will not harm the dish- washer, but could cause over-sudsing.

4.Clean up any spilled rinse agent with a damp cloth.

5.Replace the fill indicator cap and keep it tightly closed.

NOTE: Your dishwasher is designed to use a liquid rinse agent. Do not use a solid or bar-type rinse agent.

Keep rinse agent dispenser filled for best drying results

Do not fill past smallest opening

14