USING YOUR DISHWASHER
What happens in each option
Heated Dry option
If the Heated Dry option is selected, air in the dishwasher is heated during the “dry” part of the cycle. For best results, use a liquid rinse agent.
No Heat Dry option
If the No Heat Dry option is selected, air in the dishwasher is not heated during the “dry” part of the cycle. Using this option helps save energy, but dishes take longer to dry (overnight) and some water spotting may result. Some items (such as plastics) may need towel drying. For best drying results, use a liquid rinse agent.
Low Energy Washing option
(on some models)
When the low energy washing option is selected, water heating is reduced during the main wash and final rinse. This will reduce the amount of electricity needed to run the dishwasher. However, dishes may not wash as well.
Using delay wash
(on some models)
You can set the dishwasher to start a cycle 1, 2, or 3 hours later.
1.Push desired cycle selector button.
2.Push desired Option selector button(s).
3.Turn cycle control knob clockwise to the number of hours you want the dishwasher to delay before the selected cycle starts.
4.Close and latch the door.
NOTE:
•You can add items while time is counting down. Close and latch the door. The cycle control knob will not advance if the door is unlatched.
•Rinse Only and Light Wash cycles cannot be delayed.
SELECT
DRY SELECT
|
|
|
NO HEAT | HEATED | |
DRY | DRY | |
(on some models)
(on some models)
SELECT
DRY SELECT
|
|
|
NO HEAT | HEATED | |
DRY | DRY | |
(on some models)
(on some models)
12
