Motorola MVME2600 manual Auto Boot Abort Delay = 7?

6

CNFG and ENV Commands

Auto Boot Abort Delay = 7?

The time in seconds that the Autoboot sequence will delay before starting the boot. The purpose for the delay is to allow you the option of stopping the boot by use of the <Break> key. The time value is from 0-255 seconds. (Default = 7 seconds)

Auto Boot Default String [NULL for an empty string] = ?

You may specify a string (filename) which is passed on to the code being booted. The maximum length of this string is 16 characters. (Default = null string)

ROM Boot Enable [Y/N] = N?

YThe ROMboot function is enabled.

NThe ROMboot function is disabled. (Default)

ROM Boot at power-up only [Y/N] = Y?

YROMboot is attempted at power-up only. (Default)

NROMboot is attempted at any reset.

ROM Boot Enable search of VMEbus [Y/N] = N?

YVMEbus address space, in addition to the usual areas of memory, will be searched for a ROMboot module.

NVMEbus address space will not be accessed by ROMboot. (Default)

ROM Boot Abort Delay = 5?

The time in seconds that the ROMboot sequence will delay before starting the boot. The purpose for the delay is to allow you the option of stopping the boot by use of the <Break> key. The time value is from 0-255 seconds. (Default = 5 seconds)

ROM Boot Direct Starting Address = FFF00000?

The first location tested when PPCBug searches for a ROMboot module. (Default = $FFF00000)

6-8 Computer Group Literature Center Web Site