Summary of Changes

This is the third edition of the Installation and Use manual. It supersedes the May 1998 edition and incorporates the following updates.

Date

Changes

Replaces

 

 

 

July 2001

All data referring to the VME CSR Bit Set Register

V2600A/IH2

 

(VCSR_SET) and VME CSR Bit Clear Register

 

 

(VCSR_CLR) has been deleted. These registers of

 

 

the Universe II are unavailable for implementation

 

 

as intended by the MVME materials and the

 

 

Universe II User Manual.

 

 

 

 

Overview of Contents

Chapter 1, Hardware Preparation and Installation, provides general information, hardware preparation and installation instructions, operating instructions, and a functional description of the MVME2603/2604 family of single board computers.

Chapter 2, Operating Instructions, supplies information for use of the MVME2603/2604 family of single board computers in a system configuration.

Chapter 3, Functional Description, describes the MVME2603/2604 single board computer on a block diagram level.

Chapter 4, Connector Pin Assignments, provides pin assignments for the interconnect signals for the MVME2603/2604 family of single board computers.

Chapter 5, PPCBug, describes the basics of PPCBug and its architecture, describes the monitor (interactive command portion of the firmware) in detail, and gives information on actually using the PPCBug debugger and the special commands.

Chapter 6, CNFG and ENV Commands, contains information about the CNFG and ENV commands. These two commands are used to change configuration information and command parameters interactively.

xviii

Page 18
Image 18
Motorola MVME2600 manual Summary of Changes, Overview of Contents