Motorola MVME2600 manual MVME2603/2604 Base Board Preparation

1

Hardware Preparation and Installation

MVME2603/2604 Base Board Preparation

Figure 1-2 on page 1-9illustrates the placement of the switches, jumper headers, connectors, and LED indicators on the MVME2603/2604. Manually configurable items on the base board include:

❏Cache mode control (J3)

❏Flash bank selection (J10)

❏Serial Port 4 receive clock configuration (J16)

❏Serial Port 4 transmit clock configuration (J17)

❏Serial Port 4 transmit clock receiver buffer control (J20)

❏Serial Port 3 transmit clock configuration (J18)

❏System controller selection (J22)

In conjunction with the serial port settings on the base board, serial ports on the associated MVME712M or MVME761 transition module are also manually configurable. For a discussion of the configurable items on the transition module, refer to MVME712M Transition Module Preparation on page 1-14, MVME761 Transition Module Preparation on page 1-25, or to the respective user’s manuals for the transition modules (listed in Appendix D, Related Documentation) as necessary.

The MVME2603/2604 is factory tested and shipped with the configurations described in the following sections. The MVME2603/2604’s required and factory-installed debug monitor, PPCBug, operates with those factory settings.

1-6 Computer Group Literature Center Web Site