Motorola MVME2600 manual PMC Module Installation, RAM200 Placement on MVME2603/2604

Hardware Installation 1

11661.00 9611 (2-3)

Figure 1-18. RAM200 Placement on MVME2603/2604

5.Insert the four short Phillips screws through the holes at the corners of the RAM200, into the standoffs on the MVME2603/2604. Tighten the screws.

6.Reinstall the MVME2603/2604 assembly in its proper card slot. Be sure the module is well seated in the backplane connectors. Do not damage or bend connector pins.

7.Replace the chassis or system cover(s), reconnect the system to the AC or DC power source, and turn the equipment power on.

PMC Module Installation

PCI mezzanine card (PMC) modules mount beside the RAM200 mezzanine on top of the MVME2603/2604 base board. To install a PMC module, refer to Figure 1-19and proceed as follows:

http://www.motorola.com/computer/literature 1-37