Motorola MVME2600 manual Unpacking Instructions, Hardware Configuration

Unpacking Instructions 1

Unpacking Instructions

Note If the shipping carton is damaged upon receipt, request that the carrier’s agent be present during the unpacking and inspection of the equipment.

!

Caution

Unpack the equipment from the shipping carton. Refer to the packing list and verify that all items are present. Save the packing material for storing and reshipping of equipment.

Avoid touching areas of integrated circuitry; static discharge can damage circuits.

Hardware Configuration

To produce the desired configuration and ensure proper operation of the MVME2603/2604, you may need to carry out certain hardware modifications before installing the module.

The MVME2603/2604 provides software control over most options: by setting bits in control registers after installing the module in a system, you can modify its configuration. (The MVME2603/2604 control registers are described in Chapter 3, Functional Description, and/or in the MVME2600 Series Single Board Computer Programmer’s Reference Guide, as listed in Appendix D, Related Documentation.)

Some options, however, are not software-programmable. Such options are controlled through manual installation or removal of header jumpers or interface modules on the base board or the associated transition module.

http://www.motorola.com/computer/literature 1-5