Motorola MVME2600 manual EIA-530 Connections

			EIA-530 Connections
Table B-4. MVME761 EIA-530 Interconnect Signals (Continued)
Pin	Signal	Signal Name and Description
Number	Mnemonic
12	TxC_B	Transmit Signal Element Timing—DCE (B).	Control signal that clocks
		input data.
13	CTS_B	Clear to Send (B). Input to DTE from DCE to indicate that message
		transmission can begin.
14	TxD_B	Transmit Data (B). Data to be transmitted; output from DTE to DCE.
15	TxC_A	Transmit Signal Element Timing—DCE (A).	Control signal that clocks
		input data.
16	RxD_B	Receive Data (B). Data which is demodulated from the receive line; input
		from DCE to DTE.
17	RxC_A	Receive Signal Element Timing—DCE (A).	Control signal that clocks input
		data.
18	RTS_B	Request to Send (B). Output from DTE to DCE when required to transmit a
		message.
19	LL_A	Local Loopback (A). Reroutes signal within local DCE. In DTE
		configuration, always tied inactive and driven false. In DCE configuration,
		ignored
20	DTR_A	Data Terminal Ready (A). Output from DTE to DCE indicating that the
		DTE is ready to send or receive data.
21	RL_A	Remote Loopback (A). Reroutes signal within remote DCE. In DTE
		configuration, always tied inactive and driven false. In DCE configuration,
		ignored.
22	DSR_B	Data Set Ready (B). Input to DTE from DCE to indicate that the DCE is
		ready to send or receive data. In DCE configuration, always true.
23	DTR_B	Data Terminal Ready (B). Output from DTE to DCE indicating that the DTE
		is ready to send or receive data.
24	TxCO_A	Transmit Signal Element Timing—DTE (A).	Control signal that clocks
		output data.
25	TM_A	Test Mode (A). Indicates whether the local DCE is under test. In DTE
		configuration, ignored. In DCE configuration, always tied inactive and driven
		false.

B

http://www.motorola.com/computer/literature B-7