Motorola MVME2600 manual What you need to do Refer to, Connector Pin Assignments

1

Hardware Preparation and Installation

Table 1-1. Startup Overview (Continued)

What you need to do...	Refer to...
Install the transition module in the	MVME712M Transition Module Installation on page
chassis.	1-44or MVME761 Transition Module Installation on
	page 1-48
Connect a console terminal.	System Considerations on page 1-50, MVME2603/2604
	VME module
Connect any other equipment you	Chapter 4, Connector Pin Assignments
will be using.
	For more information on optional devices and
	equipment, refer to the documentation provided with the
	equipment.
Power up the system.	Applying Power on page 2-1
	Appendix C, Troubleshooting CPU Boards: Solving
	Startup Problems
Note that the debugger initializes	Using the Debugger on page 5-3
the MVME2603/ 2604.
	You may also wish to obtain the PPCBug Firmware
	Package User’s Manual , listed in Appendix D, Related
	Documentation.
Initialize the system clock.	Using the Debugger on page 5-3, Debugger Commands,
	the SET command
Examine and/or change	Chapter 6, CNFG and ENV Commands
environmental parameters.
Program the board as needed for	MVME2600 Series Single Board Computer
your applications.	Programmer’s Reference Guide , listed in Appendix D,
	Related Documentation.

1-4 Computer Group Literature Center Web Site