Eton FR1000 owner manual Press the Monitor button again to get out of Monitor mode, Scan

FR1000 OWNER’S MANUAL

OPERATING YOUR RADIO continued

FR1000 QUICK REFERENCE CHART

CHANNEL SELECTION (GMRS/FRS BAND)

Turn the TUNING knob clockwise or counter-clockwise to select one of the 22 GMRS/FRS channels.

MONITOR

Pressing the MONITOR button will let you check activity on your current channel before transmitting. This could also be used to adjust the volume level of the radio when it is not receiving a signal.

Press the MONITOR button again to get out of MONITOR mode.

SCAN

Your FR1000 Series can scan all 22 channels for any activity. To enter, quickly press the SCAN button. Repeat the same procedure to exit. Your radio will rapidly scan each of the 22 channels and stop on any active channel. Your radio will stay on the active channel as long as the signal is present and will resume scanning 5 seconds after the signal is no longer present. When you press the PTT button to trans- mit on an active channel, the scanning function will stop and remain on the active channel. To resume scanning, quickly press the button.

15